Goggle Mask

Goggle Mask

Empire E Vent Goggles

The new Empire E Vents Goggles are a low profile goggle system designed to present the smallest target profile possible while also being strong yet flexible enough for a comfortable fit whilst also keeping you in the match by glancing paintballs off the visor! The soft faceplate on the "top model" is re-enforced by way of a flexible yet strong mouth guard which allows the front of the mask to flex on impact, but stops total paintballs from pushing by or lifting it upwards, and thus protects your lips and mouth.

The "mid model" incorporates a more rigid one item faceplate which still keeps a flexible area in front of your mouth for security. These goggles have a unique Venting system designed to work functionally with how we breathe. The mouth vents can be found correctly via the application of real digitized human heads such that you breathe and shout over the vents rather than in to a large mass of plastic or rubber as with other goggle systems. As your breath hits top of the mask, it either exits immediately or is deflected sideways in addition to outwards through specially shaped vents which take the deflected breath and move it from the face plate.

These specially shaped ports project your voice and also warm breathe out on the sides, and not up on the goggle. As your breathing warms top of the mask, it gets hotter dry air in that "demist guide". This demist guide is specially designed to prevent hot moist air from a breath getting through vents inside bottom of the goggle. On the other hand, the heat is transported to dry air inside demist guide making the idea rise and move up through the lens of the goggle. As this air rises, the item draws in fresh, dryer air on the back and sides on the goggle. This allows that you have a flow of air over the lens to help avoid fogging, while ensuring no moist air gets from a breath into the zoom lens area. Side baffles inside faceplate prevent warm soaked air from moving up on the goggle so your style and hot air is expelled inside direction you want it to… out through the mask.

The ear pieces are created to cup around the ears so your ears can sit in a very natural position and your hearing when using the goggle on is the same as it was without your goggle on. We didn't put excessive cosmetic venting on the mask like many alternative companies do, because it wasn't needed from the advanced design and to maintain the smooth, clean lines that make paint more likely to glance off the goggle also to make it easier to scrub when paint does obtain onto the goggle.

Features:

Empire E Vents Goggles feature removable soft ear pieces and a straight lower profile faceplate for your maximum reduction in targeted, and ultimate "cool" thing.

The Vents lens system is a very advanced and optically right lens. Although at first glance it seems as if a "flat lens, " it actually changes in thickness to take care of the best optical level of quality possible. The power discrepancy, which means how your eyes see for straight ahead, is 0. 00 to get both Spherical power difference and Astigmatic power imbalance (the value is so small it can't become read with conventional diagnostic tests equipment). What does this kind of mean? It means what you might be seeing is really where you believe that it is, so you can be accurate in your firing.

The lens is surely an extremely safe, quick let go system. It can be replaced in seconds, yet is held very securely on the mask and frame. In contrast to other quick release devices, the Vents lens satisfies in under the sinuses piece. This means the actual nose area doesn't deflect within when shot, so it prevents this ingress of paint on the goggle under the lens. To further lock the particular lens into place, we have a "tongue and groove" across the edge of the the len's and goggle. This prevents shots at the edge of the lens forcing paint up on the goggle and helps maintain an excellent safety factor. The Lens is held in at the sides with very effective retainers, which also support the logos. This simply pushes through the lens and the goggle, then secured into position inside the frame by placing the end of the strap clip covering the retainer and twisting lower into position. The added safety being that you can't have the strap into position if the lens isn't within the goggle properly. So you can't dress yourself in the goggle until a lens is at place. It's a extremely swift and easy process, so that you can pick and choose lenses geared to your playing conditions.

The Empire E Vents Goggles has the flexibility to add a visor or brow shield. These are constructed with flexible material and are easy to fit or remove without the application of tools, and with no various other separate small pieces to get lost in your set up bag.

The Vents goggles include a high quality strap with silicon beading to keep the mask firmly with your head. The Empire goggle provides the added EE" logos in silicone for your utmost in grip.

About the Author

Anyone got a link to a bottom face mask to go along with SWAT helmet and goggles for airsoft?

Me and a friend are going for all SWAT look in airsoft and we have our SWAT style helmets and a pair of goggles but need a bottom mask to cover cheeks,mouth and nose because a balaclava wont really stop a 320fps BB from breaking our teeth XD ,please reply as soon as possible.

http://lmgtfy.com/?q=neoprene+masks

But srsly, those are going to be the best for what you're asking for. Won't be perfect, but they'll work better than a balaclava.

or cut up a paintball mask.